Skip to content

Half the homes date from 1990 to 2009

Flooring Installation White House TN Homes Are Ready For: Replacing the Originals

Half of White House went up between 1990 and 2009, so a great many original floors are worn out at about the same time. We serve homeowners on both the Sumner and Robertson sides of the city with plank, tile and the repairs underneath.

White House at a Glance

Location
21.8 miles north of central Nashville (straight line)
County
Robertson County
Population (2023 estimate)
15,340
Housing units
5,316
Median year homes were built
2002
Owner-occupied homes
76%
Detached single-family homes
80%
Built before 1970
5%
Built 2010 or later
26%

Sources: US Census Bureau 2023 Gazetteer, Vintage 2023 population estimates, and American Community Survey 2023 5-year estimates for the place. County is taken at the place’s center point; some communities extend into other counties.

Map of the 40-mile radius around Nashville with White House marked.
Straight-line 40-mile radius measured from the city center. Map outlines: US Census Bureau.

A town that grew up all at once

White House began as a stagecoach stop on the road between Louisville and Nashville, taking its name from a white two-story house built in 1829 at a time when painted houses were rare. For most of its history it stayed small. The population was 2,987 in 1990, then 7,220 in 2000, 10,255 in 2010 and 12,982 in 2020.

The housing figures match that climb. About 50% of the city’s roughly 5,300 units were built from 1990 through 2009, and 26% more since 2010. Just 5% predate 1970. The median house dates from 2002, about 80% of units are detached single-family, and about 76% of occupied homes are owner-occupied.

Put plainly, thousands of families live on floors that are 15 to 35 years old unless someone has already replaced them. Carpet from a 2002 house is well past a normal life. Sheet vinyl in a laundry room may be curling at the seams. Early floating laminate may have swollen at the edges near a dishwasher or exterior door. This page is mostly about what to do next, because flooring installation in White House TN is less about one trend than about a whole generation of homes reaching the same point.

Choosing a material for the room, not the showroom

No single floor suits a whole house. Think about what each room actually deals with.

Luxury vinyl plank

Water-resistant, comfortable underfoot and forgiving in family areas. It suits main levels, hallways and bedrooms. Our LVP and ceramic tile installation page explains the differences among products.

Ceramic or porcelain tile

Durable where water is routine, such as baths, laundry rooms and entries. It needs a rigid, flat base, so the subfloor check matters more here than anywhere else.

Carpet in bedrooms

Still a reasonable choice where people want warmth and quiet. Some owners keep it upstairs and change only the main level, which also limits the disruption.

Stairs

Often the fussiest part of the job. Plank on stairs takes matching nosing and careful fitting. It deserves its own line in any estimate so nothing is left vague.

If you are looking at both a kitchen and a floor, sort out the order early. New cabinets can sit on top of a new floor or the floor can run up to them, and each choice has consequences when appliances are later replaced. Our kitchen remodeling and bath remodeling pages cover those larger projects.

What is under the old floor decides the job

Removing the old surface is the moment of truth. A house can look perfect until the carpet comes up, and most surprises fall into a short list. Before committing to a material, try to learn which of these you have.

Slab or crawl space

The Census data does not say how many White House homes sit on each, so check your own. On a concrete slab, moisture is the main concern, and a simple moisture test should come before any glue-down or tile. Over a crawl space, you are working with a wood subfloor, and the condition of the space below matters: standing water, wet insulation or a musty smell should be dealt with first.

Flatness

Plank and large-format tile both show dips and humps. Manufacturers state how flat the floor needs to be, and a long straightedge reveals the highs and lows quickly. Leveling compound or sanding is ordinary prep and belongs in the estimate from the start.

Squeaks and soft spots

Replacing carpet is the cheapest chance you will ever get to screw down loose subfloor. Soft spots near tubs, toilets, dishwashers and exterior doors usually mean a past leak. Cut those out and fix the cause, using our plumbing team if the source is a supply line or drain.

Trim and transitions

Hard flooring changes how baseboards and door bottoms meet the floor. Decide early whether to keep the old baseboard, add quarter round or replace it. Interior doors sometimes need trimming, and thresholds at the garage and exterior doors should be planned so nothing becomes a tripping point.

Planning around a household

Replacing flooring means emptying rooms, and in an occupied house that is the hard part. A short sequence helps:

Decide the scope room by room

Note which rooms change now and which might later, so the same product and direction can continue when the rest gets done.

Get real samples home

Check them against your own light in the morning and evening. Look at how they read beside cabinets and stair rails that will stay.

Let the material settle

Follow the manufacturer’s directions on acclimating product in the house before installation. Some plank products need it and some don’t.

Clear out, including the fragile items

Furniture moves are simple to plan for, but check who handles the piano, the aquarium and anything very heavy, and agree on what happens to appliances.

Paint before the last step, where it makes sense

If walls are also changing, interior painting and drywall patches are often easier before new flooring and baseboards go in.

Our flooring installation service includes LVP and tile. We provide free estimates and spell out prep, materials and pricing in writing before work begins, so you can see exactly where the subfloor work sits in the total.

What a flooring estimate should spell out

Two quotes for the same square footage can describe very different jobs. When comparing, look for these lines, and ask about any that are missing:

  • Removal and disposal of the old floor, including pad, tack strips or old underlayment
  • Subfloor work: screws, patching, leveling compound, and what happens if rot or a soft area turns up
  • The exact product name, thickness and wear layer, along with any underlayment or moisture barrier
  • An allowance for waste and cuts, which runs higher on diagonal layouts, tile patterns and small rooms
  • Baseboard, quarter round, transitions, stair parts and door trimming
  • Moving furniture and disconnecting and reconnecting toilets, ranges, refrigerators and washers

Then think about daily life on the finished floor. Plank scratches less than some older materials, but grit under a chair leg still damages it, so felt pads and a mat at each door are worthwhile. Dogs, kids and a garage entry all argue for a thicker wear layer in the main path. Tile grout may need sealing depending on the product, and a damp mop tends to serve better than a soaking one on any plank. Ask for the maker’s care sheet and keep it with your house records, along with a couple of spare boards.

When flooring is part of something larger

A floor swap by itself is usually a simple finish job, but ask the city about your scope if anything else changes with it. White House’s Planning and Codes Department reviews permit requests and carries out inspections under the adopted building regulations, and it uses an online self-service portal for applications and inspection requests. Moving a wall, adding a bath or finishing unfinished space would normally bring that office into the picture.

The city’s permits page also sets out two outdoor rules that surprise people. A land disturbance and stormwater permit applies to activity disturbing 5,000 square feet or more, counting items such as building footprints, grading and landscaping. And a fence permit is required before building any fence or wall, with a site plan sent to the Stormwater Division and inspections before and after. The city says no fence or wall may block or divert a natural drainage flow, and that structures within utility or drainage easements must be removable at the owner’s expense.

That matters if a remodel grows into a home addition or a new patio. Check your plat for easements along the back lot line before settling the location. The Census lists White House under Robertson County at its center point, but the city also reaches into Sumner County, so county-level questions such as schools or taxes may be answered differently from one street to the next. City permits still run through the same office.

Common questions from White House owners

We have a 2005 house with original carpet. Should we replace the pad too?

Yes. Old pad holds what the old carpet held, and new carpet laid over it will wear faster. If you are moving to plank or tile, the pad and tack strips come out anyway, and that exposes the subfloor for a proper look.

Is plank safe in a basement or a slab-level room?

Many vinyl products handle damp better than wood or laminate, but a floor does not fix a moisture problem. Test the slab and find out why any dampness is there. If you are finishing a lower level, see our basement finishing page.

Do we have to do the whole house at once?

No. Many people start with the main level and do the bedrooms later. Just buy with that in mind: product lines change, so keep the name, keep a few spare boxes, and plan where the transition will fall.

Do you serve the nearby towns too?

Yes. Millersville is about five miles south and Portland about twelve miles north, and each has its own housing mix and permit office.

Sources for Local Facts

Let’s Build Something Great Together.

Ready to start your next construction or remodeling project? Tell us about your space and request a free estimate.

Nashville (615) 478-5705Atlanta (770) 669-1314